Friday, 18 March 2022

Propeller replacement

A nice shiny new propeller duly appeared and was paid for, and the challenge was to get it back in the boat. It didn't seem worthwhile to have her lifted out by the boatyard crane for a job which should only take a few minutes. So a couple of weeks ago I put the dinghy alongside her in the mud to try to get access. But, as we thought, the boat had settled down into the mud over the winter and the shaft log, that the propeller shaft fits into was nowhere to be seen. Digging away at the mud has little effect as it is so soft and liquid in Faversham Creek that its like shovelling soft porridge and the hole just fills up again. 

So today I had a more determined effort. I shifted all the anchor chain and much of the ballast onto the starboard side deck. When Bonita floated on the spring high tide I rigged up a rope from the mast to a post ashore, and tightened this up as hard as I could. The net effect of all of this was to give her a gentle list of a few degrees to starboard, about as much as sailing in a gentle breeze. It didn't seem like much but it was enough. When the tide went out and she sat down in the mud, the shaft log was just visible. It was relatively simple to slide in the new shaft and propeller and connect it up to the engine. 

Its important to keep a line attached to the new prop while installing it as the shaft and prop are heavy, slippery with mud and expensive! The mud is so soft that anything dropped in it is likely to never be seen again. I had been worrying about this job for a while so I was relieved to have got it done. It should be a few weeks before we take her out to her mooring on the Swale to start the new season, but all the remaining fitting out work should be (I hope) fairly straightforward.
The shiny new propeller in among a lot of mud

Friday, 31 December 2021

Holiday reading

I had heard of this book but never seen it before: D managed to get me a copy for Christmas. It tells the story of another Crossfields boat -about 3 ft longer than Bonita- the 'Pacific Moon'. The cover picture shows an evocative scene of a Morecambe Bay prawner yacht in a tropical paradise. The book tells the story of a trip made in 1931/2. The boat itself was obviously strongly built and stood up well to the various adventures, although like many pre-war long distance sailors they had lots of trouble with the petrol engine, rotting ropes and sail repairs. The most dramatic moment comes when the crew falls overboard in mid ocean while the skipper is asleep. Fortunately he catches hold of the trailing log line, hauls himself back to the boat and calls out to the skipper to heave him back aboard. There are advantages in having a boat with low freeboard at times like this. Inevitably one is left wondering what happened to both author and boat after the adventure was over. It seems that Sidney Howard returned to a more peaceful life in England as a journalist and remarried. Pacific Moon was sold cheaply in Tahiti to an Argentinian yachtsman, and I have not been able to find any further record of her. So what of Bonita as we look forward to the New Year? She is still in her mud berth awaiting a new propellor. I have been strengthening the cockpit sides where the pull of the sheets had opened up cracks in the woodwork. I tried to cure this a few years ago using bits of copper sheet, but the problem hasnt gone away. This time I am using bronze plates with stainless steel inserts. As my father used to say, when you find yourself doing the same repair for the second or third time, its time to do the job properly.

Wednesday, 24 November 2021

Propellor removal......

A couple of weeks ago D and I took advantage of a day of good weather, spring tides and no other duties that couldnt be rearranged to bring Bonita up Faversham creek for the winter. Remarkably, we managed the trip without going aground, although there were moments when we only had 0.1m or less under the keel. So what work is planned for this winter? For the last couple of years I have been worrying about the wear on the folding propellor. There doesnt seem to be any corrosion, but due to the metal wearing down there is quite a lot of lateral movement of the blades in their housing. How much movement is too much? How much wear can there be before there is a risk of a blade falling off? There are no easy answers to these questions, but I have previously had the experience of one blade coming off a folding propellor and its definitely a situation thats best avoided. Fortunately on that occasion we were able to sail back across the estuary to our mooring. Its not necessary to have her lifted ashore to take out the old propellor and shaft - working from the dinghy at low tide it can be removed as the boat sits in the soft mud, and a wooden bung hammered in to keep the water out. We will see if the new prop goes back as easily, as Bonita will probably settle down a bit deeper into the mud over the next few weeks.
The picture shows the old propeller and shaft after being bought ashore and much hosing down. This is a Gori type of folding propellor that I bought in 1989, so I hope its replacement will last as long. When I looked at it in the comfort and security of home, the wear didnt seem quite so bad after all, but the man in the shop who makes his living selling propellors said it definitely needed replacement. Its a significant expense so I hope that maybe the boat will perform a bit better under engine with a brand new sleek propellor. Well, perhaps it will.

Thursday, 28 October 2021

A visit from a Crossfield!

On Wednesday Bonita had a visit from Eric Crossfield. Erics great great grandfather ( I think thats right) was William Crossfield who built Bonita. William was about 40 at the time, and Bonita was as far as we know his first commission for a yacht, so no doubt he was keen to make sure everything was to the highest standard. The family long ago gave up building boats but Eric is ex-Navy and a keen yachtsman. He also has lots of documents and photos from the families boatbuilding days. This may very well have been the first time a member of the Crossfield family had been aboard Bonita since she was launched in July 1888- I hope he thought she has been looked after properly in the intervening years. Bonita is not only the oldest Crossfields boat afloat, but also probably one of the most original, with much of the Victorian shipwrights craftmanship on display. It was a breezy day, but we went for a short sail with a reef in the main. You would have thought Bonita would have been on her best behaviour for the occasion, but sadly this was not so. Being the end of the season, her bottom had got rather weedy and she was slow in stays while going about. Due to the inattention of the skipper she ran aground ( on soft mud on a rising tide) and then further disgraced herself by getting a rope around the propellor while motoring off. Apart from this we had a fine brisk and enjoyable sail in the sheltered waters of the Swale and picked up the mooring under sail. Eric stowed the sails while I unwound the remains of the rope from the propellor. It was a great pleasure having Eric aboard. He has very bravely taken on Peggy, a Crossfields boat that went round Britain with us in 2013 but now needs a lot of restoration. Hopefully she will be afloat and sailing again before too long!

Sunday, 17 October 2021

Second Arnside Conference

D and I went to Arnside (by train) for the second conference on the Crossfields and the boats they built for use in Morecambe Bay and beyond. The conference was once again ably organised by Alasdair Simpson, Commodore of the Arnside sailing club. At the last conference a couple of years ago I gave a talk on Bonita. This time we went to listen, learn and network. We had a very interesting and sociable time and hope the conference will become a regular, if not annual occasion. Its good to hear of the efforts going into preserving these fine boats. As well as the old wooden boats there are several grp Crossfields boats made from a mould taken of the old Morecambe Bay lifeboat, the William Priestley. The Crossfields made hundreds of boats and about 40 are still in existance. Bonita is the oldest, as shown in the poster on display at the conference....
The Church Hill boatyard where Bonita was built no longer exists- it was demolished a couple of years ago and replaced by new housing. Unusually, the boatyard is not on the waters edge, but up a fairly steep hill in the middle of the village. When completed, the boats were rolled on a trolley down the hill and onto the beach, to be lifted off by the incoming tide. The Crossfields had no way of getting boats back into the yard if there was a problem, so everything had to be 'right first time'. The second picture shows the river Kent, running west from Arnside out towards the sea.
<